-
REVIEW OF DOE REPORT "OIL SHALE PROJECT, EXTINGUISHMENT AND STABILIZATION...
"The Department of Energy (DOE) Anvil Points Experiment Station was established for the purpose of conducting demonstrations of the hot retorting process for the extraction of... -
High-Power Slim-Hole Drilling System
The objective of this project is to implement new high-power slim-hole motors and bits into field gas well drilling applications. Development of improved motors and bits is... -
CONTRACTS FOR FIELD PROJECTS AND SUPPORTING RESEARCH ON ENHANCED OIL RECOVERY 77
Various articles on enhanced oil recovery -
Bonding energies of bitumen to tar sand mineral
The bonding energy of bitumen in a tar sand was found by algebraically adding the heat of dissolution of bitumen on tar sand, heat of dissolution of recovered bitumen and the... -
LASL FY 80 UCC PROGRAM PROPOSAL - MEETING IN 1979
"There are many areas of concern which have been identified in reports from 1976 (1) and before as critical to the development of useful UCC technology. Three of these areas... -
INTRINSIC KINETICS OF OXIDATION OF RESIDUAL ORGANIC CARBON IN RAPIDLY...
The intrinsic kinetics of reaction of oxygen with carbonaceous residue in rapidly pyrolyzed Colorado oil shale were determined by a series of isothermal fluidized-bed... -
Water requirements and uses in Wyoming mineral industries
This Bureau of Mines report primarily concerns water usage at Wyoming mineral industry operations. It also contains water-use data on operations closely related to mineral... -
Gas separation using ion exchange membranes: Final report
The objectives of this project were twofold. The primary objective was to demonstrate the concept of using reactive ion exchange membranes (IEMs) containing organic amines for... -
GAS-COMBUSTION RETORTING PROCESS
In 1944, under the Synthetic Liquid Fuels Act, the Bureau of Mines was directed to supply the scientific, engineering, and economic information required for the establishment of... -
AN OVERVIEW OF UNDERGROUND COAL GASIFICATION---A COMPARISION OF MODELING...
This paper describes the underground coal gasification (UCG) process and the anticipated uses of the UCG product gas. The history of the development of UCG and the potential... -
EVALUATION OF SHALE-OIL RESIDUUM PROCESSING METHODS, Planning and Evaluation...
"The Bureau of Mines has presented an industry-scale oil shale project report in which a 234,000 B/CD operation is designed and its cost estimated. Crushed oil shale is retorted... -
Western gas sands project status report
The Western Gas Sands Project Plan, Project Implementation Plans, Project Plan Document FY 78 and the Quarterly Basin Activities Report are in various stages of preparation.... -
GULF PARTICIPATION IN HANNA III, AN UNDERGROUND COAL GASIFICATION EXPERIMENT...
The underground coal gasification project at Hanna, Wyoming is being conducted by the Laramie Energy Research Center for the US DOE. UCG provides a means of utilizing the energy... -
Integral Monitored Retrievable Storage (MRS) Facility conceptual design report
This report presents a summary design description of the Conceptual Design for an Integral Monitored Retrievable Storage (MRS) Facility, as prepared by The Ralph M. Parsons... -
Role of instrumentation in UCG process development
Underground coal gasification field test results obtained since 1976 are reviewed, illustrating the important role that the UCG process feature of a varying reactor geometry has... -
ANALYSES OF SHALE OIL FROM ROCK SPRINGS SITE 12 EXPERIMENT; REPORT OF...
Objective: Perform chemical and physical analyses on the shale oil produced. Provide information useful for controlling the retorting process. -
MASS SHALE RATE - A RETORT DESIGN CONSIDERATION, PLANNING AND EVALUATION REPORT NO. 2
"The study of various proposals for retorting oil shale has resulted in the recognition of the existence of certain fundamental relationships which must be considered when... -
Distribution of inorganics. Final report for the period ending March 31, 1986
The objectives of the Distribution of Inorganics project were basically threefold. One objective was to develop methods for quantifying the inorganic associations within a coal... -
Measuring and Interpreting Seismic Attenuation
The project goals are to: -Perform, for the first time, laboratory measurements of the seismic velocities and attenuation across the entire seismic band of frequencies on rocks... -
Investigation of Improved Conductivity and Proppant Applications in the...
Project Final Report NT43291-1.8-The goal of this project is to provide a better understanding of potential technical issues involving the use of proppants in the Bakken...