-
Utah FORGE: Area LiDAR Bare Earth DEM Mosaic
This is a mosaic of 154 bare earth DEM panels (0.5 m resolution) acquired during Phase II of the Utah FORGE project. The DEM covers the western Mineral Mountains and adjoining... -
Transportation Secure Data Center
The Transportation Secure Data Center (TSDC) provides free access to detailed transportation data from a variety of travel surveys and studies conducted across the nation. Data... -
Utah FORGE: TEM and Gravity Data
This submission includes a gravity data in text format and as a GIS point shapefile and transient electromagnetic (TEM) raw data. Each text file additionally contains location... -
Utah FORGE: GPS Data - Deformation Monitoring
This data bundle contains raw GPS data files and resulting data using Trimble Business Center and NOAA OPUS to process the GPS data in spreadsheets with station coordinates and... -
Fallon FORGE: Seismic Reflection Profiles
Newly reprocessed Naval Air Station Fallon (1994) seismic lines: pre-stack depth migrations, with interpretations to support the Fallon FORGE (Phase 2B) 3D Geologic model. Data... -
Utah FORGE Well 16A(78)-32 Simplified Discrete Fracture Network Data
The FORGE team is making these fracture models available to researchers wanting a set of natural fractures in the FORGE reservoir for use in their own modeling work. They have... -
Hydrothermal mineral alterations in the Brady and Desert Peak geothermal fields
Results of the analysis of HyMap's spectra against know hydrothermally altered minerals in the Brady-Desert Peak Geothermal Areas. The analysis was performed using ENVI's Target... -
2017 Western Passage Tidal Energy Resource Characterization Measurements
These data are from tidal resource characterization measurements collected between April and July 2017 in Western Passage near Eastport, Maine, USA. The dataset contains the... -
Utah FORGE Phase Native State FALCON Model Files
The submission includes FALCON input file and mesh for the an initial pressure-temperature simulation, and a second set for pressure-temperature-displacement simulation. All... -
Brady Geodatabase for Geothermal Exploration Artificial Intelligence
These files contain the geodatabases related to Brady's Geothermal Field. It includes all input and output files for the Geothermal Exploration Artificial Intelligence. Input... -
NREL GIS data: Bhutan Wind Power Density at 50m Above Ground Level
GIS data for Bhutan's Wind Power Density at 50m Above Ground Level. NREL developed estimates of Bhutans wind resources at a spatial resolution of 1 km^2 using NREL?s Wind... -
Utah FORGE: Heat Flow Contours and Well Data
This submission contains a shapefile of heat flow contour lines around the FORGE site located in Milford, Utah. The model was interpolated from data points in the Milford_wells... -
Bhutan Solar Resources
GIS data for Bhutan's direct normal irradiance (DNI), global horizontal irradiance (GHI), and latitude tilt irradiance. Researchers from NREL and the Atmospheric Sciences... -
Utah FORGE Wells Updated Temperature and Pressure Logs (June 2021)
This dataset includes updated temperature and pressure logs for Utah FORGE wells 56-32, 78-32, and 58-32. This data was acquired in June 2021. -
Utah FORGE: Temperature Contours at 200 m
The individual shapefiles in this dataset delineate estimated temperature contours (20, 40, 60, and 80 deg C) at a depth of 200 m in the Milford, Utah FORGE area. Contours were... -
Utah FORGE: Seismic Reflection Data
This is 2D and 3D seismic reflection data from Utah FORGE Phase 2c. The readme file containing an explanation of the data including data formats, software that can be used,... -
2021 Cook Inlet Tidal Energy Resource Characterization Bottom Lander Measurements
These datasets are from tidal resource characterization measurements collected on the Terrasond High Energy Oceanographic Mooring (THEOM) from 1 July 2021 to 30 August 2021 (60... -
Utah FORGE: Milford Gravity Data Shapefile
This is a zipped GIS compatible shapefile of gravity data points used in the Milford, Utah FORGE project as of March 21st, 2016. The shapefile is native to ArcGIS, but can be... -
Utah FORGE: Phase 3 Microgravity Data
A 4D microgravity survey began in early 2019 in order to benchmark surface and subsurface elevations prior to Phase 3 drilling and stimulation campaigns. Microgravity stations... -
Utah FORGE: Area LiDAR Bare Earth DEM Mosaic
This is a mosaic of 154 bare earth DEM panels (0.5 m resolution) acquired during Phase II of the Utah FORGE project. The DEM covers the western Mineral Mountains and adjoining...