-
MODFLOW-2005 model archive for simulation of zones of groundwater contributio...
A groundwater-flow model was used to simulate zones of contribution to wells south of Naval Weapons Industrial Reserve Plant, Bethpage, New York. The model results will be used... -
MODFLOW2005 and GWM-2005 used to optimize managed aquifer recharge in an Upda...
An existing three-dimensional groundwater flow model of northern Utah County (https://doi.org/10.3133/sir20095049), was updated for use with the Groundwater Management... -
SEAWAT code used to couple MODFLOW and MT3DMS models, and supplemental data u...
Three-dimensional numerical models were used to determine the permeable pathways between the HANDLEY underground nuclear test and downgradient boreholes ER-20-12 and PM-3,... -
MODFLOW-2005 model used to evaluate the potential effects of sea-level rise o...
A three-dimensional groundwater flow model, MODFLOW-2005 with the SWI2 module, was developed to provide a better understanding of the geohydrology of the Kirkwood-Cohansey... -
MODFLOW-2005 with SWI2 used to evaluate the water-table response to sea-level...
A MODFLOW-2005 model, using the SWI2 package, was developed for the Sandy Hook Unit, Gateway National Recreation Area (hereafter Sandy Hook) in New Jersey to evaluate the... -
MODFLOW-2005, MODPATH, and MOC3D used for groundwater flow simulation, pathli...
The U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency and the New Hampshire Department of Environmental Services, developed a model for used... -
MODFLOW-2005 files for numerical model simulations of potential changes in wa...
A previously developed numerical groundwater flow model of the eastern Great Basin was used to investigate where potential drawdown and capture of natural discharge is likely to... -
MODFLOW-2005 with SWI2 used to evaluate the water-table response to sea-level...
A MODFLOW-2005 model, using the SWI2 package, was developed for the Sandy Hook Unit, Gateway National Recreation Area (hereafter Sandy Hook) in New Jersey to evaluate the... -
MODFLOW-2005, MODFLOW-NWT, and SEAWAT models used to simulate variable-densit...
The U.S. Geological Survey, in cooperation with the U.S. Department of the Navy, developed several 3-D groundwater flow models for used with MODFLOW-2005, MODFLOW-NWT, and... -
SEAWAT Model of Flow and Chloride Transport in the 1,500-Foot, 2,400-Foot, an...
An updated three-dimensional, groundwater-flow and chloride-transport model (SEAWAT) of the Southern Hills regional aquifer system in southeastern Louisiana and southwestern... -
MODFLOW2005 groundwater-flow model used to simulate water-supply pumping scen...
The U.S. Geological Survey, in cooperation with the Town of Barnstable, Massachusetts, modified an existing numerical, steady-state regional MODFLOW-2005 groundwater-flow model... -
MODFLOW-2005, MODPATH, and MOC3D used for groundwater flow simulation, pathli...
The U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency and the New Hampshire Department of Environmental Services, developed a model for used... -
MODFLOW-2005 model used to evaluate water-management scenarios for the Missis...
A three-dimensional groundwater flow model (MODFLOW-2005) of the Mississippi embayment, South-Central United States, was developed as part of a national project initiated by the... -
Model Inputs and Outputs for Simulating and Predicting the Effects of Climate...
This data release contains model input and output files for simulating and predicting thermal spring flows at Hot Springs National Park (HOSP), Hot Springs, Arkansas. A three-... -
MODFLOW, MT3D-USGS and VS2DH simulations used to estimate groundwater and nut...
This model archive data release includes all models used to characterize the magnitude, spatial distribution and timing of groundwater (GW) flow through lakebed sediments to... -
MODFLOW-2005 and SWI2 models for assessing groundwater availability in volcan...
Steady-state numerical groundwater-flow models were constructed for the islands of Kaua'i, O'ahu, and Maui, Hawai'i. Separate models were created for each island using... -
MODFLOW-2005, MODPATH, and MOC3D used for groundwater flow simulation, pathli...
The U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency and the New Hampshire Department of Environmental Services, developed a model for used... -
MODFLOW, MT3D-USGS and VS2DH simulations used to estimate groundwater and nut...
This model archive data release includes all models used to characterize the magnitude, spatial distribution and timing of groundwater (GW) flow through lakebed sediments to... -
MODFLOW-2005 model archive for simulation of zones of groundwater contributio...
A groundwater-flow model was used to simulate zones of contribution to wells south of Naval Weapons Industrial Reserve Plant, Bethpage, New York. The model results will be used... -
MODFLOW-2005, MODFLOW-NWT, and SEAWAT models used to simulate variable-densit...
The U.S. Geological Survey, in cooperation with the U.S. Department of the Navy, developed several 3-D groundwater flow models for used with MODFLOW-2005, MODFLOW-NWT, and...