-
Small Active Readout Device for Dose Spectra from Energetic Particles and Neu...
DoSEN is an early-stage space technology research project with the sole objective of developing the concept and demonstrating the proof-of-principle of a space radiation... -
Precision Formation Alignment Navigation System
The Precision Formation Alignment Navigation System, or pFANtASY, is an integrated guidance and navigation subsystem for the acquisition and fine alignment of a dual spacecraft... -
Wavefront Control for High Performance Coronagraphy on Segmented and Centrall...
Future large astronomical space telescopes will likely be segmented and centrally obscured. Our team will develop and demonstrate an accurate and efficient approach to measure... -
Large-Area, UV-Optimized, Back-Illuminated Silicon Photomultiplier Arrays, Ph...
Large-area (3m2), UV-sensitive focal plane arrays are needed for observation of air showers from ultra-high energy cosmic rays (JEM-EUSO) as well as for visible-wavelength... -
Biological sulfur metabolism on the ancient Earth
Scientific goals and objectives A central goal of our research is achieving a deeper understanding of the unusual sulfide-based assimilatory sulfur metabolism that is found... -
Understanding newly discovered oscillation modes in magnetically shielded Hal...
I propose to investigate the newly discovered oscillation modes specific to Magnetically Shied (MS) Hall Effect Thrusters (HET). Although HETs are classified as a Stationary... -
Development of Novel Integrated Antennas for CubeSats
The antenna system on a small satellite is a critical component, as a failure of the antenna can lead to mission failure. Present antenna systems are typically wire “whip”... -
Capacitive Vector Skin Friction Measurement Systems for Complex Flow Fields, ...
The Interdisciplinary Consulting Corporation (IC2) proposes to develop dual-axis shear stress sensors that are applicable in ground test facilities covering a large range of... -
GPU Accelerated Ultrasonic Guided Wave Simulation Toolbox (UGW-Sim) for Virtu...
Ultrasonic guided waves are being used as a NDE/SHM technique to detect flaws and damage in fracture critical structures such as aerospace structures. However, due to the... -
Predictive Thermal Control Technology for potential HabEx Mission
Imaging and characterize Earth-like planets requires the ability to block 1010 of the host star’s light with a 10-11 stability. For an internal coronagraph, this requires... -
Telescope Dimensional Stability Study for a Space-based Gravitational Wave Mi...
Gravitational waves are on the brink of discovery all across the frequency spectrum. The Advanced LIGO network will be starting science operations to cover frequencies above 10... -
Hexavalent-Chrome Free Coatings
NASA’s earlier cooperative efforts with the Department of Defense (DOD) and industry have shown some promising alternatives for specific applications and substrates, but... -
Reaction Sphere
The Reaction Sphere seeks to provide an advancement over traditional reaction wheels by utilizing a new method of 3 axis attitude control and fine pointing using a lighter and... -
The Ultraviolet Spectra of AGN: Intrinsic Properties and Intervening Material
I propose to use ultraviolet spectra of active galactic nuclei (AGN) to study both the structure of AGN themselves as well as the intergalactic medium (IGM), which is seen as... -
Mechanism Based Damage Model for Linerless Thin-Ply Composite Pressure Vessel...
Thin-ply composites are being considered by NASA for space exploration applications, where the suppression of microcracks could give rise to linerless cryogenic tanks. In this... -
Aircraft Albedo Pod
ALPO is an effort to develop an airborne science instrument pod utilizing an advanced integration concept that minimizes structural impacts to the host aircraft. This proof of... -
Methodology for Distributed Electric Propulsion Aircraft Control Development ...
In the proposed STTR study, Empirical Systems Aerospace, Inc. (ESAero) and the University of Illinois at Urbana-Champaign (UIUC) will create a methodology for the development of... -
Predicting deformation and stress as a function of additive manufacturing pro...
We will combine part-level FEM model of residual stresses with phase-field transformation model to predict deformation and cracking due to thermal stresses from the AM building... -
Vision-Based Automation System for Safe and Efficient Taxi Operations, Phase I
In 2012 the National Transportation Safety Board (NTSB) issued safety recommendations to the Federal Aviation Administration (FAA) and the European Aviation Safety Agency... -
Life Support Systems: Oxygen Generation and Recovery
The Advanced Exploration Systems (AES) Life Support Systems project Oxygen Generation and Recovery technology development area encompasses several sub-tasks in an effort to...