Dean Baker / Asit Biswas Wednesday, October 31, 2018
Department of Energy Phase II STTR “Superalloy MMC Components For Advanced Turbine Components”
Panel Discussion: Ceramic Materials for Gas Turbines: CMC R&D Programs Across Federal Agencies; B. A. Pint, J. A. Haynes, E. Lara-Curzio Materials Science and Technology Division Oak Ridge National Laboratory Wednesday, October 31, 2018
Ceramic Matrix Composites for Energy Applications: DOE Fossil Energy and Oak Ridge National Laboratory
Tom I-P. Shih School of Aeronautics and Astronautics, Purdue University Tuesday, October 30, 2018
Rich Dennis U.S. Department of Energy National Energy Technology Laboratory Tuesday, October 30, 2018
Welcome to the 2018 UTSR Project Review Meeting
Joe Weber, General Electric; Thursday, November 1, 2018
High Temperature Additive Architectures for 65% Efficiency
Lee Shunn, Cascade Technologies; Wednesday, October 31, 2018
LES of oxy-fuel combustion for sCO2 power cycles
CMC Research at NASA Glenn Joseph E. Grady, Branch Chief Ceramic & Polymer Composites Branch NASA Glenn Research Center Cleveland, Ohio Wednesday, October 31, 2018
Panel Discussion: Ceramic Materials for Gas Turbines: CMC R&D Programs
Supraj Prakash, University of Michigan; Poster Presentation
High-Fidelity Numerical Analysis of the Detonation Wave Structure
Jim Steppan*, Kyu-Bum Han, Balky Nair, Jesse Nachlas, Byron Millet, HiFunda LLC; Brian Jaques, Allyssa Bateman, LukeSchoensee, YaizaRodriguez, Tim Phero, Boise State University (BSU); Wednesday, October 31, 2018
Development of a Novel Ceramic-to-Metal Seal for High-Temperature, High-Pressure Applications
Rajendra K. Bordia and Fei Peng Research conducted by Dr. Quan Li Department of Materials Science and Engineering Clemson University In Collaboration with GE Power Team led by John Delvaux Tuesday, October 30, 2018
Integrated TBC/EBC for SiC Fiber Reinforced SiC Matrix Composites for Next Generation Gas Turbines
Subith Vasu, University of Central Florida, Orlando, Florida; October 31, 2018
Chemical Kinetic Modeling Development and Validation Experiments for Direct Fired sCO2 Combustor
Robert F. Kunz, The Pennsylvania State University; Wednesday, October 31, 2018
LES and RANS/DERM Modeling for Design Optimization of Additively and Conventionally Manufactured Internal Turbine Cooling Passages
PI: Wenting Sun Co-PI: Devesh Ranjan, Tim Lieuwen, and Suresh Menon School of Aerospace Engineering Georgia Institute of Technology Wednesday, October 31, 2018
Investigation of Autoignitionand Combustion Stability of High Pressure Supercritical Carbon Dioxide Oxy-combustion
Chun-Hung Wang, University of Central Florida; Poster Presentation
Computational Kinetics in Supercritical CO2 Environment: Ethane Dissociation and Recombination Reactions C2H6 ⇌ CH3 + CH3
Carson Slabaugh, Purdue University; Wednesday, October 31, 2018
Advancing Pressure Gain Combustion in Terrestrial Turbine Systems
J.P. Bons, A. Ameri, J. Gregory, A. Hossain, L. Agricola, E. Asar, The Ohio State University Aerospace Research Center; Wednesday, October 31, 2018
Revolutionizing Turbine Cooling with Micro-Architectures Enabled by Direct Metal Laser Sintering
PI: Bugra Ertas, PhD, Senior Principal Engineer, Mechanical Systems, GE Global Research; Thursday, November 1, 2018
Novel Modular Heat Engines with sCO2 Bottoming Cycle Utilizing Advanced Oil-Free Turbomachinery
Rahul Bidkar, Uttara Kumar, Jason Mortzheim, Anthony Poli, Deepak Trivedi, Chris Wolfe, GE Global Research; Tim Allison, Aaron Rimpel, Natalie Smith, Southwest Research Institute; Wednesday, October 31, 2018
Low -leakage seals for utility-scale sCO2 turbines
Project Lead - Yaroslav Chudnovsky, Ph.D., MBA, Principle Investigator - Aleksandr Kozlov, Ph.D., Sc.D., gti; Thursday, November 1, 2018
Advanced Modular Sub-Atmospheric Hybrid Heat Engine
PI - Timothy Lieuwen Co PI - Wenting Sun Georgia Tech Tuesday, October 30, 2018
High-Frequency Transverse Combustion Instabilities in Low-NOx Gas Turbines
Jacqueline O'Connor, Ph.D. Mechanical and Nuclear Engineering Pennsylvania State University Tuesday, October 30, 2018
Understanding Transient Combustion Phenomena in Low-NOx Gas Turbines
Nagi Gabraeel, School of Industrial and Systems Engineering, Georgia Tech; Wednesday, October 31, 2018
Real-time Health Monitoring of Gas Turbine Components Using Online Learning and High Dimensional Data
Ganesan Subbaraman, Gas Technology Institute; Thursday, November 1, 2018
Modular Heat Engine System for Co-Production of H2 Power and CO2
Rajendra K. Bordia, Clemson University; Poster Presentation
David L. Blunck, Oregon State University; Poster Presentation
Pulse Detonation Engine for Power Extraction from Oxy-Combustion of Coal-Based Fuels
Andrew North, Siemens Energy, Inc.; Thursday, November 1, 2018
Extension of Operating Envelope for an Extremely Low NOX Axial Stage Combustion System
John Delvaux, GE Tuesday, October 30, 2018
High Temp. CMC Nozzles for 65% Efficiency
Rotating Detonation Rocket Engines (RDRE) Eric Paulson, RDRE Deputy Program Manager AFRL/RQRC Tuesday, October 30, 2018
DOE UTSR Pressure Gain Combustion Panel Session
Timothy C. Lieuwen, Georgia Tech; Wednesday, October 31, 2018
High–Temperature Low–NOx Combustor Concept Development
Tim Held, Echogen Power Systems; Thursday, November 1, 2018
Integrated Optimization and Control of a Hybrid Gas Turbine/sCO2 Power Systems
Don Ferguson, National Energy Technology Laboratory; Thursday, November 1, 2018
Pressure Gain Combustion for Land Based Power Generation
John Delvaux, GE; Thursday, November 1, 2018
High Temperature, High AN2 Last Stage Blade for 65% Combined Cycle Efficiency
Sridharan Ramesh (NETL, WVURC), Ed Robey (NETL, AECOM), Doug Straub (NETL), James Black (NETL) Tuesday, October 30, 2018
High Temperature Film Cooling Experiments at NETL
Debolina Dasgupta (Presenter Tim Lieuwen), Georgia Institute of Technology; Poster Presentation
Chemical Flame Structure for Turbulent Lean Premixed Flames
Tim Weathers, Combustion Research and Flow Technology, Inc. (CRAFT Tech); Poster Presentation
Simulation Modeling of Trans-Critical sCO2 in Turbomachinery
Dr. Scott Martin Eagle Flight Research Center Embry-Riddle Aeronautical University Daytona Beach, FL Tuesday, October 30, 2018
Improving NOx Entitlement with Axial Staging
Minking Chyu, Albert To, University of Pittsburgh; Bruce S. Kang, West Virginia University; Tuesday, October 30, 2018
Integrated Transpiration and Lattice Cooling Systems Developed by Additive Manufacturing with Oxide-Dispersion-Strengthened (ODS) Alloys
Arif Hossain, The Ohio State University; Poster Presentation
Revolutionizing Turbine Cooling with Micro-Architectures Enabled by Direct Metal Laser Sintering (DMLS)
Takuma Sato, University of Michigan, Ann Arbor Poster Presentation
High-Fidelity Simulations of Rotating Detonation Engines
Turbine Aero-Thermal Technologies for 65% Combined Cycle Efficiency
Rahul Bidkar, GE Global Research; Wednesday, October 31, 2018
Low-leakage seals for utility-scale sCO2 turbines
Panel Discussion, Pressure Gain Combustion Research and Development, Adam Holley, Tuesday, October 30, 2018
AFRL/DOE RDE Collaboration Panel Session
The 2018 UTSR project review meeting co-hosted by Embry-Riddle Aeronautical University was held at the Hilton Daytona Beach Resort/Ocean Walk Village in Daytona Beach, FL from Oct-30 – Nov 1. The theme of the review meeting was synergistic research between DOE, DOD, and NASA.
2018 University Turbine Systems Research Project Review Meeting
Klaus Brun, Ph.D. Director R&D, Elliott Group Tuesday, October 30, 2018
The US Natural Gas Compression Infrastructure: Opportunities for Efficiency Improvements
S.C. (John) Gülen, Bechtel Infrastructure & Power; Thursday, November 1, 2018
Turbocompound Reheat Gas Turbine Combined Cycle
Kevin Hoopes, Southwest Research Institute; Thursday, November 1, 2018
Advanced Gas Turbine and sCO2 Combined Cycle Power System
Karen A. Thole, Penn State; Tuesday, October 30, 2018
START: Advanced Cooling Design Studies and Turbine Rim Seal Results
Peter A. Chapman, Jr., P.E., Principal Engineer, Mechanical Solutions, Inc.; Thursday, November 1, 2018
Advanced Gas Foil Bearing Design for Supercritical CO2 Power Cycles
PI: Mirko Gamba Co-PI: Venkat Raman Fabian Chacon, James Duvall, Takuma Sato, and Supraj Prakash Department of Aerospace Engineering University of Michigan; Wednesday, October 31, 2018
A Joint Experimental/Computational Study of Non-idealities in Practical Rotating Detonation Engines
Scott Claflin, Director, Power Innovations; Wednesday, October 31, 2018
Rotating Detonation Combustion for Gas Turbines – Modeling and System Synthesis to Exceed 65% Efficiency Goal
Omer Dogan, National Energy Technology Laboratory; Wednesday, October 31, 2018
Erosion in Components of Supercritical CO2 Power Cycles
B. A. Pint Corrosion Science & Technology Group Materials Science and Technology Division Oak Ridge National Laboratory Tuesday, October 30, 2018
Materials Issues for (1) Advanced Supercritical CO2 Cycles and (2) High Efficiency Gas Turbines
Michael Hughes, General Electric (GE) Tuesday, October 30, 2018
Advanced Multi-Tube Mixer Combustion for 65% Efficiency
Jacob Delimont, Ph.D., Nathan Andrews, Craig Nolen, Carolyn Day, Southwest Research Institute; Wednesday, October 31, 2018
Direct Fired Oxy-Fuel Combustor for sCO2 Power Cycles
Mirko Gamba, University of Michigan Poster Presentation
Fuel Injection Dynamics and Composition Effects on Rotating Detonation Engine Performance
Dr. John T. Kelly and Brandon Masuda, Altex Technologies Corporation; Wednesday, October 31, 2018
Corrosion and Erosion Resistant Features for High Pressure Supercritical Carbon Dioxide Heat Exchangers
The success of the UTSR program has been made possible by a network of universities, the collaborating gas turbine industry, and the DOE turbine program – all of which are facilitated by an annual UTSR project review meeting, which is open to the public and brings together experts from academia, industry, and government to present and discuss ongoing turbine research sponsored by the DOE Office of Fossil Energy UTSR program under existing cooperative agreements..
Agenda - 2018 University Turbine Systems Research Project Review Meeting
Rich Dennis, Technology Manager Advanced Turbines and SCO2 Power Cycles U.S. Department of Energy National Energy Technology Laboratory Tuesday, October 30, 2018
Overview of the US DOE Advanced Turbines Program