-
Autonomous Underwater Vehicle (AUV) Inspection Using a 3D Laser
The objectives of this project was as follows: (1) Conduct close-in, high resolution structural inspection from an AUV. (2) Generate 3D models of subsea structures such as... -
Hydrate Modeling & Flow Loop Experiments for Water Continuous & Dispersed Sys...
Hydrates continue as the most important flow assurance problem; an order of magnitude larger than waxes/asphaltenes. The project objectives are to: (1) modify the current... -
Effects of Fiber-Rope/Seabed Contact on Subsequent Rope Integrity
The objective of this project is to enable qualifying mooring rope for pre-installation on the seabed, which will greatly reduced risk by reducing the time required to hook up... -
Hi-Res Environmental Data for Enhanced UDW Operations Safety Fact Sheet
Ocean currents can pose significant challenges to safe oil and gas operations in the Gulf of Mexico (GoM). One primary objective of this research program was to better... -
Deepwater Reverse-Circulation Primary Cementing Fact Sheet
The objectives of the project are to assess the viability of performing Revers-Circulation Primary Cementing (RCPC) to reduce circulation pressure requirements for deepwater... -
Vortex Induced Vibration Study for Deep Draft Column Stabilized Floaters
A vortex induced motion (VIM) study to determine the sensitivity of the VIM response to the geometric parameters of deep draft semisubersibles, computational fluid dynamics...
E' possibile inoltre accedere al registro usando le API (vedi Documentazione API).