Bathymetry Hillshade--Offshore of Coal Oil Point, California

This part of SIM 3302 presents data for the bathymetry and shaded-relief maps (see sheets 1, 2, SIM 3302) of the Offshore of Coal Oil Point map area, California. The raster data file for the bathymetry map is included in "Bathymetry_OffshoreCoalOilPoint.zip." The raster data file for the shaded-relief map is included in "BathymetryHS_OffshoreCoalOilPoint.zip." Both are accessible from http://pubs.usgs.gov/ds/781/OffshoreCoalOilPoint/data_catalog_OffshoreCoalOilPoint.html. The bathymetry and shaded-relief maps of the Offshore of Coal Oil Point map area, California, were generated from bathymetry data collected by the U.S. Geological Survey (USGS), by California State University, Monterey Bay, Seafloor Mapping Lab (CSUMB), and by Fugro Pelagos. Most of the nearshore and shelf areas were mapped by the USGS in the summers of 2006, 2007, and 2008, using a combination of 117-kHz and 234.5-kHz SEA (AP) Ltd. SWATHplus-M phase-differencing sidescan sonars. A small area in the far-eastern nearshore and shelf was mapped by CSUMB in the summer of 2007, using a 244-kHz Reson 8101 multibeam echosounder. The outer shelf and slope were mapped by Fugro Pelagos in 2008, using a combination of 400-kHz Reson 7125, 240-kHz Reson 8101, and 100-kHz Reson 8111 multibeam echosounders. The nearshore bathymetry and coastal topography were also mapped by Fugro Pelagos in 2009 for the U.S. Army Corps of Engineers (USACE) Joint Lidar Bathymetry Technical Center of Expertise, using the SHOALS-1000T bathymetric-lidar and the Leica ALS60 topographic-lidar systems. All of these mapping missions combined to collect bathymetry from the 0-m isobath to beyond the 3-nautical-mile limit of California's State Waters.