Picometer-Resolution MEMS Segmented DM, Phase II

Microelectromechanical systems (MEMS) technology has the potential to create deformable mirrors (DM) with 10^4 actuators that have size, weight, and power specifications that are far lower than conventional piezoelectric and electrostrictive DMs. However, building a MEMS DM with a relatively large aperture that is flat in the unpowered state is challenging. Currently, a large portion of the mirror stroke must be used to flatten the MEMS DMs. In the case of the large-stroke segmented MEMS DMs manufactured by Iris AO, there is sufficient stroke for wavefront correction after flattening. However, the resolution is significantly reduced because the dynamic range of the digital-to-analog converters (DAC) used to operate the DM is spread over multiple microns of stroke rather than the 0.5 micron range required for a coronagraph. This Phase I SBIR will make substantial improvements in the fabrication process of MEMS segmented DMs that reduce the deleterious residual surface-figure errors. It will do so by systematically addressing the sources of the segment position variations as well as addressing low-spatial frequency chip bow that can result in large peak-to-valley deformations across the DM array. The Iris AO DM architecture will also be modified to enable picometer resolution actuation with ultra-precision drive electronics.

Data and Resources

Field Value
accessLevel public
bureauCode {026:00}
catalog_@context https://project-open-data.cio.gov/v1.1/schema/catalog.jsonld
catalog_@id https://data.nasa.gov/data.json
catalog_conformsTo https://project-open-data.cio.gov/v1.1/schema
catalog_describedBy https://project-open-data.cio.gov/v1.1/schema/catalog.json
identifier TECHPORT_9371
issued 2017-09-01
landingPage https://techport.nasa.gov/view/9371
modified 2020-01-29
programCode {026:027}
publisher Space Technology Mission Directorate
resource-type Dataset
source_datajson_identifier true
source_hash e3d7a9350e54044c5362e7ba2dec9508e23b1792
source_schema_version 1.1
Groups
  • AmeriGEOSS
  • National Provider
  • North America
Tags
  • active
  • amerigeo
  • amerigeoss
  • ckan
  • geo
  • geoss
  • goddard-space-flight-center
  • national
  • north-america
  • united-states
isopen False
license_id notspecified
license_title License not specified
maintainer TECHPORT SUPPORT
maintainer_email hq-techport@mail.nasa.gov
metadata_created 2025-11-19T17:36:29.077466
metadata_modified 2025-11-19T17:36:29.077471
notes Microelectromechanical systems (MEMS) technology has the potential to create deformable mirrors (DM) with 10^4 actuators that have size, weight, and power specifications that are far lower than conventional piezoelectric and electrostrictive DMs. However, building a MEMS DM with a relatively large aperture that is flat in the unpowered state is challenging. Currently, a large portion of the mirror stroke must be used to flatten the MEMS DMs. In the case of the large-stroke segmented MEMS DMs manufactured by Iris AO, there is sufficient stroke for wavefront correction after flattening. However, the resolution is significantly reduced because the dynamic range of the digital-to-analog converters (DAC) used to operate the DM is spread over multiple microns of stroke rather than the 0.5 micron range required for a coronagraph. This Phase I SBIR will make substantial improvements in the fabrication process of MEMS segmented DMs that reduce the deleterious residual surface-figure errors. It will do so by systematically addressing the sources of the segment position variations as well as addressing low-spatial frequency chip bow that can result in large peak-to-valley deformations across the DM array. The Iris AO DM architecture will also be modified to enable picometer resolution actuation with ultra-precision drive electronics.
num_resources 4
num_tags 10
title Picometer-Resolution MEMS Segmented DM, Phase II