UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence F - Raw Data

Overview

Sequence F: Downwind High Cone (F)

This test sequence used a downwind, rigid turbine with an 18° cone angle. The wind speed ranged from 10 m/s to 20 m/s. Excessive inertial loading due to the high cone angle prevented operation at lower wind speeds. Yaw angles of ±20° were achieved. The blade tip pitch was 3°. The rotor rotated at 72 RPM. Blade and probe pressure measurements were collected. The teeter dampers were replaced with rigid links, and these two channels were flagged as not applicable by setting the measured values in the data file to –99999.99 Nm. The teeter link was replaced with a shorter bar so the load cell was not installed during this test. However, the teeter link load cell channel was flagged as not applicable by setting the measured values in the data file to -99999.99 N.

Data Details

File naming information can be found in the attached Word document "Sequence F Filename Key", copied from the Phase VI Test Report.

Data and Resources

Field Value
DOI 10.21947/1483641
accessLevel public
bureauCode {019:20}
catalog_@context https://openei.org/data.json
catalog_@id https://openei.org/data.json
catalog_conformsTo https://project-open-data.cio.gov/v1.1/schema
catalog_describedBy https://project-open-data.cio.gov/v1.1/schema/catalog.json
dataQuality true
identifier https://data.openei.org/submissions/4201
issued 2018-11-28T00:00:00Z
landingPage https://a2e.energy.gov/data/uae6/uae6.z05.00
license https://creativecommons.org/licenses/by/4.0/
modified 2020-03-27T00:00:00Z
programCode {019:010}
projectNumber 67025
projectTitle Wind Data Hub
publisher Wind Energy Technologies Office (WETO)
resource-type Dataset
source_datajson_identifier true
source_hash 5249f91fb10736bfd9cde01f0cf5db52e3b0fc87
source_schema_version 1.1
Groups
  • AmeriGEOSS
  • National Provider
  • North America
Tags
  • 00
  • a2e
  • amerigeo
  • amerigeoss
  • atmosphere-to-electrons
  • ckan
  • eere
  • geo
  • geoss
  • national
  • north-america
  • raw-data
  • sequence-f
  • uae6
  • united-states
  • unsteady-aerodynamics-experiment-phase-vi-nrel-nasa-ames-wind-tunnel-experiment
  • weto
  • wind
  • wind-tunnel-tests-data
  • z05
isopen True
license_id cc-by
license_title Creative Commons Attribution
license_url http://www.opendefinition.org/licenses/cc-by
maintainer Lee Fingersh
maintainer_email lee.fingersh@nrel.gov
metadata_created 2025-11-21T15:31:45.091629
metadata_modified 2025-11-21T15:31:45.091633
notes **Overview** Sequence F: Downwind High Cone (F) This test sequence used a downwind, rigid turbine with an 18° cone angle. The wind speed ranged from 10 m/s to 20 m/s. Excessive inertial loading due to the high cone angle prevented operation at lower wind speeds. Yaw angles of ±20° were achieved. The blade tip pitch was 3°. The rotor rotated at 72 RPM. Blade and probe pressure measurements were collected. The teeter dampers were replaced with rigid links, and these two channels were flagged as not applicable by setting the measured values in the data file to –99999.99 Nm. The teeter link was replaced with a shorter bar so the load cell was not installed during this test. However, the teeter link load cell channel was flagged as not applicable by setting the measured values in the data file to -99999.99 N. **Data Details** File naming information can be found in the attached Word document "Sequence F Filename Key", copied from the Phase VI Test Report.
num_resources 1
num_tags 20
title UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence F - Raw Data