UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence V - Raw Data

Overview

Sequence V: Tip Plate (F)

This test sequence used an upwind, rigid turbine with a 0° cone angle. The wind speed ranged from 5 m/s to 25 m/s, and the yaw angle was held at 0°. The blade pitch angle was 3°. The rotor rotated at 72 RPM. Blade pressure measurements were collected. The five-hole probes were removed and the plugs were installed. Plastic tape 0.03-mm-thick was used to smooth the interface between the plugs and the blade. The teeter dampers were replaced with rigid links, and these two channels were flagged as not applicable by setting the measured values in the data file to –99999.99 Nm. The teeter link load cell was pre-tensioned to 40,000 N. During post-processing, the probe channels were set to read -99999.99. The standard tip blocks were replaced with a tip plate to simulate the effect of an undeployed tip-mounted aerodynamic brake as shown in Appendix A. Note that the blade radius was not changed during post-processing so the pressure tap locations are at the same radial location, but the reference to 30% represents 30% of 5.029 m, not 4.943 m. Throughout this report, references to the blade span are made for the 5.029- m radius, not the 4.943-m radius.

Data Details

File naming information can be found in the attached Word document "Sequence V Filename Key", copied from the Phase VI Test Report.

Data and Resources

Field Value
DOI 10.21947/1483855
accessLevel public
bureauCode {019:20}
catalog_@context https://openei.org/data.json
catalog_@id https://openei.org/data.json
catalog_conformsTo https://project-open-data.cio.gov/v1.1/schema
catalog_describedBy https://project-open-data.cio.gov/v1.1/schema/catalog.json
dataQuality true
identifier https://data.openei.org/submissions/4217
issued 2018-11-29T00:00:00Z
landingPage https://a2e.energy.gov/data/uae6/uae6.z21.00
license https://creativecommons.org/licenses/by/4.0/
modified 2020-03-27T00:00:00Z
programCode {019:010}
projectNumber 67025
projectTitle Wind Data Hub
publisher Wind Energy Technologies Office (WETO)
resource-type Dataset
source_datajson_identifier true
source_hash 2a9396baf9f5fb7fbf2c577d958d4d2fbc2e4b3c
source_schema_version 1.1
Groups
  • AmeriGEOSS
  • National Provider
  • North America
Tags
  • 00
  • a2e
  • amerigeo
  • amerigeoss
  • atmosphere-to-electrons
  • ckan
  • eere
  • geo
  • geoss
  • national
  • north-america
  • raw-data
  • sequence-v
  • uae6
  • united-states
  • unsteady-aerodynamics-experiment-phase-vi-nrel-nasa-ames-wind-tunnel-experiment
  • weto
  • wind
  • wind-tunnel-tests-data
  • z21
isopen True
license_id cc-by
license_title Creative Commons Attribution
license_url http://www.opendefinition.org/licenses/cc-by
maintainer Lee Fingersh
maintainer_email lee.fingersh@nrel.gov
metadata_created 2025-11-22T12:59:56.197321
metadata_modified 2025-11-22T12:59:56.197325
notes **Overview** Sequence V: Tip Plate (F) This test sequence used an upwind, rigid turbine with a 0° cone angle. The wind speed ranged from 5 m/s to 25 m/s, and the yaw angle was held at 0°. The blade pitch angle was 3°. The rotor rotated at 72 RPM. Blade pressure measurements were collected. The five-hole probes were removed and the plugs were installed. Plastic tape 0.03-mm-thick was used to smooth the interface between the plugs and the blade. The teeter dampers were replaced with rigid links, and these two channels were flagged as not applicable by setting the measured values in the data file to –99999.99 Nm. The teeter link load cell was pre-tensioned to 40,000 N. During post-processing, the probe channels were set to read -99999.99. The standard tip blocks were replaced with a tip plate to simulate the effect of an undeployed tip-mounted aerodynamic brake as shown in Appendix A. Note that the blade radius was not changed during post-processing so the pressure tap locations are at the same radial location, but the reference to 30% represents 30% of 5.029 m, not 4.943 m. Throughout this report, references to the blade span are made for the 5.029- m radius, not the 4.943-m radius. **Data Details** File naming information can be found in the attached Word document "Sequence V Filename Key", copied from the Phase VI Test Report.
num_resources 1
num_tags 20
title UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence V - Raw Data