Optical scattering measurements and simulation data for one-dimensional (1-D) patterned periodic sub-wavelength features

This data set consists of both measured and simulated optical intensities scattered off periodic line arrays, with simulations based upon an average geometric model for these lines. These data were generated in order to determine the average feature sizes based on optical scattering, which is an inverse problem for which solutions to the forward problem are calculated using electromagnetic simulations after a parameterization of the feature geometry. Here, the array of features measured and modeled is periodic in one-dimension (i.e., a line grating) with a nominal line width of 100 nm placed at 300 nm intervals, or pitch = 300 nm; the short-hand label for the features is "L100P300." The entirety of the modeled data is included, over two thousand simulations that are indexed using a top, middle, and bottom linewidth as floating parameters. Two subsets of these data, featuring differing sampling strategies, are also provided. This data set also contains angle-resolved optical measurements with uncertainties for nine arrays which differ in their dimensions due to lithographic variations using a focus/exposure matrix, as identified in a previous publication (https://doi.org/10.1117/12.777131). We have previously reported line widths determined from these measurements based upon non-linear regression to compare theory to experiment. Machine learning approaches are to be fostered for solving such inverse problems. Data are formatted for direct use in "Model-Based Optical Metrology in R: MoR" software which is also available from data.nist.gov. (https://doi.org/10.18434/T4/1426859). Note: Certain commercial materials are identified in this dataset in order to specify the experimental procedure adequately. Such identification is not intended to imply recommendation or endorsement by the National Institute of Standards and Technology, nor is it intended to imply that the materials are necessarily the best available for the purpose.

Data e Risorse

Campo Valore
accessLevel public
accrualPeriodicity irregular
bureauCode {006:55}
catalog_@context https://project-open-data.cio.gov/v1.1/schema/data.json
catalog_conformsTo https://project-open-data.cio.gov/v1.1/schema
catalog_describedBy https://project-open-data.cio.gov/v1.1/schema/catalog.json
identifier ark:/88434/mds2-2290
issued 2021-01-05
landingPage https://data.nist.gov/od/id/mds2-2290
language {en}
license https://www.nist.gov/open/license
modified 2020-08-14 00:00:00
programCode {006:045}
publisher National Institute of Standards and Technology
references {https://dx.doi.org/10.1117/12.816569,https://dx.doi.org/10.1117/12.827676,https://dx.doi.org/10.1364/AO.51.006196,https://dx.doi.org/10.1088/1361-6501/aa5586,https://dx.doi.org/10.1117/12.2551504}
resource-type Dataset
rights Certain commercial materials are identified in this dataset in order to specify the experimental procedure adequately. Such identification is not intended to imply recommendation or endorsement by the National Institute of Standards and Technology, nor i
source_datajson_identifier true
source_hash dcb09331ff097ad0d9c10bb2cde6b6590f911201
source_schema_version 1.1
theme {Nanotechnology:Nanometrology,"Metrology:Dimensional metrology","Manufacturing:Process measurement and control"}
Gruppi
  • AmeriGEOSS
  • National Provider
  • North America
Tag
  • AmeriGEO
  • AmeriGEOSS
  • CKAN
  • GEO
  • GEOSS
  • National
  • North America
  • United States
  • angle-resolved-scattering
  • bright-field-microscopy
  • electromagnetic-simulations
  • experimental
  • gratings
  • inverse-problems
  • machine-learning
  • microscopy
  • patterned-semiconductors
  • scatterfield-microscopy
  • scattering
  • semiconductors
  • simulations
isopen False
license_id other-license-specified
license_title other-license-specified
maintainer Bryan Barnes
maintainer_email bryan.barnes@nist.gov
metadata_created 2025-09-24T01:30:58.889701
metadata_modified 2025-09-24T01:30:58.889712
notes This data set consists of both measured and simulated optical intensities scattered off periodic line arrays, with simulations based upon an average geometric model for these lines. These data were generated in order to determine the average feature sizes based on optical scattering, which is an inverse problem for which solutions to the forward problem are calculated using electromagnetic simulations after a parameterization of the feature geometry. Here, the array of features measured and modeled is periodic in one-dimension (i.e., a line grating) with a nominal line width of 100 nm placed at 300 nm intervals, or pitch = 300 nm; the short-hand label for the features is "L100P300." The entirety of the modeled data is included, over two thousand simulations that are indexed using a top, middle, and bottom linewidth as floating parameters. Two subsets of these data, featuring differing sampling strategies, are also provided. This data set also contains angle-resolved optical measurements with uncertainties for nine arrays which differ in their dimensions due to lithographic variations using a focus/exposure matrix, as identified in a previous publication (https://doi.org/10.1117/12.777131). We have previously reported line widths determined from these measurements based upon non-linear regression to compare theory to experiment. Machine learning approaches are to be fostered for solving such inverse problems. Data are formatted for direct use in "Model-Based Optical Metrology in R: MoR" software which is also available from data.nist.gov. (https://doi.org/10.18434/T4/1426859). Note: Certain commercial materials are identified in this dataset in order to specify the experimental procedure adequately. Such identification is not intended to imply recommendation or endorsement by the National Institute of Standards and Technology, nor is it intended to imply that the materials are necessarily the best available for the purpose.
num_resources 26
num_tags 21
title Optical scattering measurements and simulation data for one-dimensional (1-D) patterned periodic sub-wavelength features